![]() To test if the blade arms are moving freely, place a straight edge across one arm and then gently push down on the other arm. If they still don’t work, your motor may be defective and needs to be replaced. Check the washer fluid level if it’s low, add more fluid and try turning on the wipers. If it looks damaged or corroded, it may be time for a new connector. If your wipers are not working properly, inspect the electrical connector that powers the motors. Here are some tips to help you determine if your windshield wiper motor is in need of replacement: When a wiper motor goes bad, the blades no longer move properly and left unchecked, this can cause water and debris to build up on the windshield, preventing driver visibility. The most common reason for a windshield wiper motor to go bad is because of neglect or improper use. The cost of replacement for a windshield wiper motor can range from around $60 to over $200. How do you know if your wiper motor is bad? Try not to use metal tools, as this could damage the arm. Clear away any debris that may have accumulated under or around the arm over time, and clean any grease or oil from its surfaces using a cloth or a solvent such as acetone or alcohol. Be sure to keep track of which wire goes where! Remove both screws that attach the arm to its bracket and detach it from the vehicle. Turn off the power to the wiper motor by unplugging the cord from the electrical outlet or turning off the switch at the base of the wiper motor.ĭisconnect both ends of the motor wire by pulling them straight out of their connectors. It should be attached to a bracket on the front of the vehicle. Here’s how: Locate the wiper arm on the windshield. If it’s the motor, you’ll need to reset it. The first step is to determine if the problem is with the motor itself or the gearbox. When your windshield wipers stop working, it’s time to take action.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |